KnifeKits.com
0
Home
0 View Cart
0 Wishlist
  1. Home
  2. Item

Western Hunter – DIY Knife Making Kit – USA Design

Posted on

Western Hunter – DIY Knife Making Kit – USA Design The Western Hunter is a tapered tang fixed blade design with a slip over guard/bolster. It is 10.50 inches in overall length and features a 5.25 inch blade length that measures 1.25 inches at its widest point. The blade on the Western Hunter is 0.20 inches at the thickest point. The blade and handle tang on the Western hunter are both tapered for weight reduction and balance. This design includes (6) 0.120 tang holes for handle attachment with (6) matching 1.50 x 0.120 inch stainless steel pins. The stainless steel slip-over guard has (1) 0.065 mounting hole with a matching stainless steel 1.5 x .065 inch pin for attachment. Properly built, the Western Hunter tapered tang fixed blade knife kit will produce an heirloom quality personal hunting knife that will last and serve for years. Spend a Saturday in your shop and turn out something truly spectacular. This kit can do it!SpecificationsModel: Western HunterBlade Steel: 9Cr13CoMoV (Equivalent SUS440C) | (HRC 58-60) (Heat Treated/Cryo-Treated for Optimum Blade Performance)Blade Finish: SatinOverall Length: 10.50 InchesBlade Length: 5.20 InchesCutting Edge: 5.00 InchesThickness 0.200 thick (thickest point)Tang Holes: (6) 0.120 InchGuard Design: Slip Over Stainless SteelGuard Pin: (1) 1.5 x 0.065 InchHandle Pinstock Included = YesHandle Pins: (6) 1.5 x 1.20 Inch (Stainless Steel)Weight: 7.2oz / 205 gm.Handle Material Included = NoGift Boxed = Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

MDR1911 – Competed Folding Knife – USA Design

Posted on

MDR1911 – Folding Knife – USA Design. This exclusive folding knifefeatures an AUS8 stainless blade with a full “blackout” finish on all exterior parts. The standard handles (included) are sure-grip styled rubber and are ready for assembly.

Midwest Hunter – DIY Knife Making Kit – USA Design

Posted on

Midwest Hunter – DIY Knife Making Kit – USA Design The Midwest Hunter knife kit is purpose built for use in the field. The drop point knife blank design allows for a larger cutting edge which makes the Midwest Hunter knife kit great for cutting, carving, and skinning. This design features (5) 0.156 inch through-holes for handle construction (stainless steel pinstock included) and (1) 0.250 thong hole for optional treatment. The tang holes on this model can be modified to work with larger pinstock, or with threaded fasteners. To finish, add the handle scales of your choice, together with a touch of proper finishing, and you can create a fabulous knife that you’ll be proud to own and carry for years.General Kit SpecificationsBlade Steel: 440C stainless steel | (Heat Treated/Cryo-Treated)Blade Finish: SatinBlade Length: 3.75 InchesOverall Length: 7.62 InchesBlade Width: 0.875 InchesTang Holes Diameter: (5) 0.125 InchesHandle Pinstock Included: YesThong Hole Diameter: (1) 0.250 InchesThickness: 0.125 InchesHandle Material Included: Yes, if selected aboveGift Boxed: Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Camel Bone Knife Handle Scales for DIY Knife Making – 35+ Different Options

Posted on

Bone Knife Handle Scales – for DIY Knife Making – Multiple Textures and Colors Select Color and Texture Above CKK Industries offers a large collection of Camel Bone knife handle scales. We offer a wide variety of Camel Bone handle material including smooth radius handle scales, textured, and natural Camel Bone handle scales. We recommend this Camel Bone knife handle material for its durability and good looks. Add these Camel Bone handle materials to your next knife making project. Specifications Material: Camel Bone Size: Select Above Dyed: Select Above Surface Texture: Select Above For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Drop Point Cub – DIY Knife Making Kit – USA Design

Posted on

Drop Point Cub – DIY Knife Making Kit – USA Design The Drop Point Cub knife kit is a great hunter/skinner design. It was purpose-created to fit well in the hand, where the butt can be held freely in the palm to improve precision cutting work control. The drop point blade is made from 440A stainless steel, and the pre-attached guard is made from high quality brass. The blade length on the Drop Point Cub is 2.75 inches, and the blade thickness is 0.130 inches. It comes hollow-ground, satin-finished, and has a pre-pinned brass finger guard attached. It features (8) 0.078 inch perimeter tang holes for handle fastening (stainless steel pinstock included), and has a single 0.187 inch thong hole for optional use (thong hole tubing not included). This is a great drop point knife kit design and is a fun, affordable, and simple project to complete.General Kit SpecificationsDrop Point CubSkill Rating: Level IIBlade Steel: 440A stainless steel (RC = 54-56)(Heat Treated)Blade Finish: SatinBlade Length: 2.75 inchesBlade Width: 0.95 inchesOverall Length: 6.625 inchesThickness: 0.130 inchesGuard: Stainless Steel (pre-pinned)Tang Holes: (8) 0.078 inches (stainless steel pinstock included)Thong Hole: (1) 0.187 inches (stainless thong-hole tubing included)Handle Material: Yes, if selected aboveGift Boxed: Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

HT Saddle Bowie – DIY Knife Making Kit – USA Design

Posted on

HT Saddle Bowie – DIY Knife Making Kit – USA Design The HT Saddle Bowie knife kit is a great project for someone who wants a larger camp sized bowie with a dress 416SS (engravable) or brass guard. It is designed to fit a slip-over handle and can be finished with 3 pin placement options. This is a great hidden tang bowie blade blank design project for that favorite large stag antler you’ve been saving. With the Bowie inspired design, you get a great cutting grind with a highly tested survival tip. The blade is made from 440C stainless and the pre-pinned guard is made from 416SS (engravable) or brass. The blade length on the HT Saddle Bowie is 7.875 inches and the thickness is 0.160 inches. It comes hollow-ground, satin-finished, and has the brass finger guard attached. This hidden tang bowie knife design is a fun, affordable, and simple project to complete. The hidden tang has (3) pre-drilled 0.1875 inch through-holes in it for handle attachment (brass or stainless steel pinstock included).General Kit SpecificationsHT Saddle BowieSkill Rating: Level IIBlade Steel: 440C stainless steelRC = 54-56(Heat Treated)Blade Finish: SatinBlade Length: 7.875 InchesBlade Width: 1.57 InchesGuard: Brass or 416 Stainless SteelTang Length: 4.50 InchesTang Holes: (3) 0.187 InchesHandle Pinstock Included = Yes (brass or stainless steel)Thickness: 0.160 InchesHandle Material Included = Yes, if selected aboveDesigned in USA For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

CLIP POINT HUNTER – DIY Knife Making Kit – USA Design

Posted on

Clip Point Hunter – DIY Knife Making Kit – USA Design The Clip Point Hunter is a hidden tang knife kit design that is modeled around the half-tang concept. This type of knife handle design is perfect for use with antler tips, etc. The Bowie blade blank is 440C stainless steel and is 15/16 inches wide at its widest point. The blade length is 4-7/8 inches and the thickness of 140 inches. It comes hollow ground, satin finished and has a pre-pinned brass finger guard attached.This is a fine knife value and is a fun and simple project to complete. The tang has 2 pre-drilled .156 holes in it.General Kit SpecificationsClip Point HunterSkill Rating: Level IIBlade Steel: 440C stainless steelRC = 56-58 (Heat Treated for Optimum Blade Performance)Blade Finish: SatinGuard = BrassBlade Length: 4-7/8 inchesBlade Width: 15/16”Thickness: .140”Tang Holes: (2) .156 inches (5/32″)Gift Boxed = Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Micro Bearing Washers for Knife Pivots – (Select Size) – (Stainless Steel)

Posted on

Micro Bearing Washers for Knife Pivots – (Select Size) – (Stainless Steel) – (1-5 Pairs) – for Folding Knife Repair & Upgrade These are stainless steel micro caged bearing washers. They are specially designed for creating the maximum friction-free contact between blade and liner on folding knives. These are high precision, well made, and extremely durable. Each stainless steel ball is caged within its own micro setting carriage. These are part of the main washer bezel and are balanced by a full distribution of similar ball settings. With heat-treated balls and bezel, each washer is able to withstand countless openings with smooth precision and straight blade alignment. These are as smooth and stout as it gets. For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Knife Coil Springs for Folding Knife Repair and Replacement – USA Sizes

Posted on

Knife Coil Springs for Folding Knife Repair and Replacement – USA Sizes We manufacture the world’s most extensive line of coil springs for knife conversion and replacement. We carry the coil size and strength that you need to get your favorite knife back to top firing shape. We offer our replacement coil springs in heat-treated and cryo-treated formats to insure maximum performance and long action life. Our springs can also be used in custom handmade knife making, as well as high-performance coil spring replacements for standard production folders and other factory knives. In the vast majority of cases, our springs are far superior to the standard coil springs offered in most folding knife designs. They can increase the action quality of a knife with a simple spring replacement. Another performance quality offered in our replacement coils is torque control, with Mega, Maxx, and High torque spring designs to benefit the customization and control of a knife’s opening action. Our High Torque coil springs are a direct replacement for most existing knives. In many cases, a knife will gain more opening power than with their current spring.Our Maxx Torque coil is a slightly stronger version of our standard coil and has a Zinc coated finish. Designed to deliver an extra 4-6% more torque, you’ll find this model is great for assisting longer blades, or in older actions.Our MEGA Torque coil is the strongest knife coil spring on the market today. Designed to deliver the highest torque in the industry, you’ll find this model has no equal in providing the “snap” to even the longest blades or oldest actions. This spring is the King of Hardcore Opening Action! For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

0