KnifeKits.com
0
Home
0 View Cart
0 Wishlist
  1. Home
  2. Item

File Guide – Stainless Steel – (2.75 x 1.60) – Carbide Faced – “Big Mert”

Posted on

File Guide – Stainless Steel – (2.75 x 1.60) – Carbide Faced – “Big Mert” The “Big Mert” file guide is used by clamping the blade between the jaws, enabling you to precision file both sides of the blade dead even using files or a grinder. The benefits are blade bevels starting perfectly even, and stick tang shoulders being dead square and even for perfect bolster fit. Or anything else you need to file two sides to be the same on. The file guide is in solid stainless steel, and will not rust when dunked in water during grinding to keep the blade cool. Steel dust will not stick to the non-magnetic steel. The face is protected by carbide strips, which only diamond or other exceptionally hard tools will scratch. These are 78 HRC and very hard but: NOTICE ceramic belts can and will damage carbide. This tools is for use with hand tools, or normal aluminum oxide belts if using a grinder. The carbides are 3.9 mm thick and can be replaced if required. The carbide strips are recessed slightly down into the stainless steel for added protection. This way the strips will not be knocked off, or be under pressure when clamping a blade in the file guide. This also ensures there is less pressure on the carbide strip when clamping in a blade as they back onto a shoulder of steel. The file guide accepts up to 70 mm wide blades (2.75 Inches) up to 40 mm (1.6 Inches) thick. Note: This fits on both sides of the platen, as the long bolts only point inwards when used on the right side of the platen where there is space for them. When grinding on the left side of the platen, the bolts point towards you and the recessed bolt heads make sure you have access on both sides. Note this is a precision hand tool and can be hard to open the first few times. As any file guide it needs to be screwed on firmly and evenly, letting the guide pins do their job. Specifications Massive 49.5 mm wide body for better control on wide blades Each carbide strip is 20 mm wide, 80 mm long and 3.9 mm thick, at HRC 78 Non-magnetic, steel dust does not stick to it Stainless will not rust All screws are recessed into the body for easy access on flat platen Accepts up to 70 mm wide blades, up to 40 mm thick blades and guards Guide pins are hardened steel for an even more sturdy construction and less chance of jamming CreativeMan logo on one side and a custom BigMert logo on the other Dimensions are 100 x 85 x 15 mm For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Oregon Skinner – DIY Knife Making Kit – USA Design

Posted on

Oregon Skinner – DIY Knife Making Kit – USA Design The Oregon Skinner is a high quality bolstered skinning design which is 6.50 inches overall in length. It has a 2.75 inches long blade that is 0.90 inches wide and 0.125 inches thick. This AUS8 high carbon stainless steel blade comes with three 0.190 inch diameter through-holes for 0.187 inch handle pins (stainless steel pinstock included), handle bolts, and/or tubing. This pattern also has two 0.125 inch diameter holes for optional pins in the middle of the handle.The Oregon Skinner is hollow-ground and mirror-polished. It comes standard with stainless steel bolsters and bolster pins. This is a great design for a working skinner and a really fun project to build. General Kit SpecificationsOregon SkinnerSkill Rating: Level IIBlade Steel: AUS8 stainless steel | RC 56-58 (Heat Treated/Cryo-Treated for Optimum Blade Performance)Blade Finish: High PolishBlade Length: 2.75 InchesOverall Length: 6.50 InchesBlade Width: 0.90 InchesThickness: 0.125 InchesHandle Pinstock Included = YesHandle Material Included = Yes, if selected above For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Hidden Bolt (10 Pack) – Matching Step Drills Optional – for DIY Knife Handles

Posted on

Hidden Bolt Fasteners (10 Pack) – Matching Step Drills (Optional) – for DIY Knife Handles -Select Color, Size, and Combo Above These are Hidden Bolt Fasteners. They are used for knife handle attachment. With this design, you will create a step hole in your handle material that is slightly larger than the shank of the fastener. The two-part assembly allows for you to pass the shank precisely through your knife tang hole and handle material, allowing the larger radius of the fastener heads to create a pinch point on both sides of the handle material, where it can then be tightened down to a secure hold. Once the hidden bolt has been tightened, it can be sanded to a flush finish with the knife handle surface. This will result in a smooth, pin-like visual effect. When used with epoxy and/or thread-locker adhesive, they will create a permanent handle bond. For more knife making kits, knife making supplies, and knife parts, see ( https://www.ebay.com/usr/ckkindustries)

SS-3.0 – DIY Folding Knife Making Kit – USA Design

Posted on

SS-3.0 Super Squirt – DIY Folding Knife Making Kit – USA Design The Super Squirt Senior (SR) button lock folding knife kit was designed to be a mid-size pocket knife design. This folding knife kit version is longer than the 2.0 series by 1.20 inches overall and has a classic 2.75 inch modified blade designed with a modern clip point.This button lock folding knife kit is stainless steel and very precise. Designed to be the finest quality knife kit available to builders. With the added functionality of the button lock system, you’ll have to look hard to find a better folding knife kit for the money, and none more fun to build, modify, or operate.This folding knife kit can be finished with simple assembly or modified with additional sanding. You can also add effects with file work and as many handle treatment interpretations as you can think of. The sky is the limit with the versatility of this design.All parts with this model come gift boxed with a natural satin finished blade, bolsters, liners, and assembly parts. General Kit SpecificationsSkill Rating: Level II-IVMechanism Type : Button LockKit Finish: Stainless Steel or BlackoutBlade Steel: AUS8 (Heat/Cryo-Treated)Blade Finish: Stainless Steel or BlackoutBlade Styles: Tactical Grind w/Thumb RestBlade Length: 2.75 InchesClosed Length: 3.375 InchesOverall Length: 6.00 InchesLiners: Stainless Steel (Heat treated. Black Finish or Stainless Steel)Handles Included: Yes, if selected above For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

CS-475 – DIY Knife Making Kit – USA Design

Posted on

CS-475 – DIY Knife Making Kit – USA Design The CS-475 is a military-styled survival knife kit with a multi-purpose design. This is an excellent mid-sized fixed blade knife kit with an overall length at 10.25 inches, and a nicely balanced 4.75 inch blade length. This fixed blade knife blank features a deep false edge and has a serrated gripper surface on the top spine of the blade. It is hollow-ground, has a beautiful satin finish, and comes pre-drilled with (3) .250 inch holes for handle pins (included – stainless steel). This fixed blade knife kit design also has a .250 inch thong hole pre-drilled in the rear of the handle (thong-hole tubing not included). Made from AUS8 stainless steel, this blade blank has been heat and cryo-treated for durability, and for maximum edge retention.For alternate handle construction, use any of our .250 inch handle pin stock, Corby rivets, handle bolts, or mosaic pins, etc. The CS-475 is a very popular model, and makes a great project for a weekend knife making session. Spend some quality workshop time with this kit and enjoy the fun of custom knife making and customization.SpecificationsSkill Rating: Level IIBlade Steel: AUS8 (Heat/Cryo-Treated)Overall Length: 10.25 inchesBlade Length: 4.75 inchesBlade Width: 1.625 inchesBlade Thickness: .178 inchTang Holes: (3) .250 inchesHandle Pinstock Included: Yes (Stainless Steel)Handle Material Included: Yes, if selected aboveThong Hole: (1) .250 inches (Tubing not included)Finish: Satin For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Acorn Nut Fasteners (10 Pack) – Matching Step Drills Optional – for DIY Handles

Posted on

Acorn Nut Fasteners (10 Pack) – Matching Step Drills (Optional) – for DIY Knife Handles -Select Color, Size, and Combo Above These are Acorn Nut Fasteners. They are also referred to as “Luke Rivets” for knife handles. Acorn Nut Fasteners are 3-piece threaded fasteners that work extremely well for knife handle attachment. With this design, you will create a step hole in your handle material that is slightly larger than the shank of the threaded rod. The three-part assembly allows for you to pass the threaded rod precisely through your knife tang hole and handle material, allowing the larger radius of the heads to create a pinch points on both sides of the handle material, where it can then be tightened down to a secure hold. Once the threaded heads have been tightened, they can be sanded to a flush finish with the handle surface. This will result in a smooth, pin-like visual effect on the final knife handle. When used with epoxy and/or thread-locker adhesive, they will create a permanent handle bond. Select Matching Step Drill Option Above. For more knife making kits, knife making supplies, and knife parts, see ( https://www.ebay.com/usr/ckkindustries)

Ranger Lockback – DIY Folding Knife Making Kit – USA Design

Posted on

Ranger Lockback – DIY Folding Knife Making Kit – USA Design The Ranger Lockback folding knife kit is a full-sized folder and has a 2 7/8 inch satin finished flat ground blade made from 440C stainless steel. It has been cryogenically treated for additional toughness and edge holding performance. The bolsters, handle pins and liners are made of stainless steel. This lockback folding knife kit design is 4 1/4 inches closed and is 7 inches overall when open. This is a sharp looking knife design when properly finished. It is loads of fun to build and embellish. Properly finished, this knife kit will compete with knives many times its price. General Kit SpecificationsSkill Rating: Level IIIBased on modification desire.Blade Steel: 440C SS (heat-treated to RC 56-58)Overall Length: 7.0 InchesHandle Length: 4.25 InchesBlade Length: 2.875 InchesHandle Material Included: Yes, if selected abovePivot: Stainless SteelLock bar/Backspine: Stainless SteelComes with Shim StockGift Boxed = Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Persian Skinner – DIY Knife Making Kit – USA Design

Posted on

Persian Skinner – DIY Knife Making Kit – USA Design The Persian Skinner hidden tang knife kit is a great upswept skinner blade blank design. It is designed to fit a slip-over handle and can be finished with a single pin if desired. This is a great design project for that favorite stag antler you’ve been saving. With the Persian inspired design, you get a great cutting grind with a highly workable tip. The blade blank is made from 440A and the pre-attached guard is made from 420ss.The blade length on the Persian Skinner is 3.75 inches and the thickness is .130 inches. It comes hollow ground, satin finished and has a pre-pinned 416ss finger guard attached. This is a great Persian-styled knife making kit blank, and will make a fun, affordable and simple project to complete. The handle tang on this knife blade blank has (2) pre-drilled .156 (5/32) inch through-holes for handle construction. Stainless steel handle pinstock is incuded with this kit.General Kit SpecificationsPersian SkinnerSkill Rating: Level IIBlade Steel: 440A stainless steelRC = 54-56(Heat Treated)Blade Finish: SatinBlade Length: 3.75 InchesBlade Width: 1.0 InchesThickness: .130 InchesTang Length: 2.5 InchesTang Holes: (2) .156 (5/32) InchesHandle Pinstock Included: YesGuard: 420 stainless steel (pre-attached)Handle Material Included: Yes, if selected aboveDesigned in USA For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

0