Item Tag: DIY Knife Making Kit

Peacemaker Bowie – DIY Knife Making Kit – USA Design The Peacemaker Bowie hidden tang knife making kit is our tribute to the combination large camp knife/bowie design. It is 13 inches overall and has a fully ground 7-3/4 inch satin finished blade. This Bowie knife blank is designed to work with a full handle treatment, affixed with either a pommel/butt cap or pinned using the (2) 3/16 inch tang holes. The handle tang has a 1/4-20 threaded end for use with a tang nut. The front of the handle tang is slotted for use with a traditional guard.This bowie knife blade blank has a false top edge and is 1.6 inches wide at the widest point. It is .170 inches thick, and made from AUS8 stainless steel with a hardness of RC 56-58. This model has an excellent edge holding ability. It is very well balanced and feels excellent in the hand. Properly finished, this knife kit will compete with any production camp knife on the market in both performance and value.General Kit SpecificationsPeacemaker BowieSkill Rating: Level IIIBlade Steel: AUS8 | RC = 56-58 (Heat Treated/Cryo-Treated for Optimum Blade Performance)Blade Finish: SatinBlade Length: 7.75 InchesOverall Length: 13 InchesBlade Width: 1.6 InchesThickness: .170 InchesHandle Material Included: NoHandle Pinstock Included: NoTang Nut Thread Size: 1/4-20 For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Scouts Bowie – DIY Knife Making Kit – USA Design The Scout’s Bowie is a very cool looking hidden tang bowie blade blank design. 7-3/4″ overall with a 3-3/4″ hollow ground blade length. The trailing point Bowie knife making kit features a false edge and is threaded for 10-32 tang nuts or pommels. The blade thickness is .125 and is 13/16″ at the widest point. It is made from 440 stainless and is satin finished.General Kit SpecificationsScout’s BowieSkill Rating: Level IIIBlade Steel: 440C stainless steel | RC = 56-58 (Heat Treated/Cryo-Treated for Optimum Blade Performance)Blade Finish: SatinBlade Length: 3.75 InchesOverall Length: 7.75 InchesBlade Width: .825”Thickness: .125” For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

STX10 – DIY Folding Knife Making Kit – USA Design The STX10 folding knife kit features all of the parts needed to build this dual bearing flipper design. Once built, this model will astonish you with its build quality and action smoothness. This knife kit also features an optional reversible pocket clip (included) for secure pocket carry. The action on this model is lightning fast and the lockup is safe and reliable. This is an excellent design for those who want to explore the build dynamics of a classically designed modern bearing flipper folder. For aspiring knife makers, this build will reveal everything you need to know to adapt this popular mechanism to your own folding knife designs.At 10 inches in overall length, the STX10 bearing flipper is a big boy for a folding knife. With the dual caged bearing system incorporated in this model, the action on this large flipper will shock and amaze you from its first opening. This knife kit is seriously cool, and rock solid fun!General Kit SpecificationsSkill Rating: Level I-IIBlade Steel: 440C Stainless Steel (heat-treated to RC 56-58)Handle Length: 5.60 InchesBlade Length: 4.40 InchesOverall Length: 10.00 InchesHandle Material: IncludedPivot: Stainless Steel (pass-through)Washers: Micro Bearing Washer (2)(Stainless Steel)Pocket Clip: Reversible (Included)Gift Boxed: YesRequires T6 and T8 TORX drivers for assembly. (not included) For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Clip Point Hunter – DIY Knife Making Kit – USA Design The Clip Point Hunter is a hidden tang knife kit design that is modeled around the half-tang concept. This type of knife handle design is perfect for use with antler tips, etc. The Bowie blade blank is 440C stainless steel and is 15/16 inches wide at its widest point. The blade length is 4-7/8 inches and the thickness of 140 inches. It comes hollow ground, satin finished and has a pre-pinned brass finger guard attached.This is a fine knife value and is a fun and simple project to complete. The tang has 2 pre-drilled .156 holes in it.General Kit SpecificationsClip Point HunterSkill Rating: Level IIBlade Steel: 440C stainless steelRC = 56-58 (Heat Treated for Optimum Blade Performance)Blade Finish: SatinGuard = BrassBlade Length: 4-7/8 inchesBlade Width: 15/16”Thickness: .140”Tang Holes: (2) .156 inches (5/32″)Gift Boxed = Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Bobcat – DIY Folding Knife Making Kit – USA Design The Bobcat Lockback folding knife making kit has a 2-1/2 inches satin finished, hollow ground blade that is made of AUS-8 steel (with vanadium added). It has been cryogenically treated for additional toughness and edge holding performance and holds a 56-58rc hardness. The bolsters, back-spacers, liners and pins are made of 416 stainless steel for maximum work-ability. This excellent lockback knife kit design is 3-5/8 inches closed and is 6-3/8 inches when open.Properly built, this folding knife kit will produce a fantastic pocket knife for everyday use. It has fast lines and excellent lockup and action. Specifications:Skill Rating: Level III (Based on modification desired)Blade Steel: AUS-8 (heat-treated to RC 56-58)Handle Length: 3.60 InchesBlade Length: 2.75 InchesHandle Material: Yes, if selected abovePivot: Stainless SteelBolsters/Lockbar/Backspine: 416 Stainless SteelComes with Shim StockGift Boxed: Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Gentleman Dirk – DIY Knife Making Kit – USA Design The Gentleman Dirk with brass or stainless steel guard is a great kit knife project. For under $20.00, plus handle material, you can build one of the finest hidden tang dagger knife blanks you’ll ever handle. The kit parts are precise and manufactured with the highest precision to give you the perfect substrate for your creativity. This scottish dirk knife blank has a hidden tang design and modeled to fit a slip-over handle style. It can be finished with up to (4) handle pin placement options at 0.187 inch separations (brass or stainless steel pinstock included). This is a excellent knife kit project for a favorite handle block or antler roll. With the Scottish Dirk inspired design, you get a double-grind blade with a modern blood groove in the center-line. The dagger blade blank is made from 440 Stainless Steel and the slip-over oval guard on this version is made from brass or 416 stainless steel (engravable). The blade length on the Gentleman Dirk is 9.00 inches and the thickness is 0.15 inches.General Kit SpecificationsGentleman DirkSkill Rating: Level IIBlade Steel: 440C Stainless SteelRC = 54-56 (Heat Treated)Blade Finish: SatinOverall Length: 14.00 InchesBlade Length: 9.00 InchesBlade Width: 1.25 InchesTang Length: 5.00 InchesThickness: .150 InchesTang Holes = (4) 0.187 InchesHandle Pinstock Included = Yes (Brass or Stainless Steel)Handle Material Included = Yes, if selected aboveGuard SpecificationsType – Slip-over OvalMaterial – Brass or 416 Stainless SteelDimensions – 2.75 x .90Gift Boxed = Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Western Hunter – DIY Knife Making Kit – USA Design The Western Hunter is a tapered tang fixed blade design with a slip over guard/bolster. It is 10.50 inches in overall length and features a 5.25 inch blade length that measures 1.25 inches at its widest point. The blade on the Western Hunter is 0.20 inches at the thickest point. The blade and handle tang on the Western hunter are both tapered for weight reduction and balance. This design includes (6) 0.120 tang holes for handle attachment with (6) matching 1.50 x 0.120 inch stainless steel pins. The stainless steel slip-over guard has (1) 0.065 mounting hole with a matching stainless steel 1.5 x .065 inch pin for attachment. Properly built, the Western Hunter tapered tang fixed blade knife kit will produce an heirloom quality personal hunting knife that will last and serve for years. Spend a Saturday in your shop and turn out something truly spectacular. This kit can do it!SpecificationsModel: Western HunterBlade Steel: 9Cr13CoMoV (Equivalent SUS440C) | (HRC 58-60) (Heat Treated/Cryo-Treated for Optimum Blade Performance)Blade Finish: SatinOverall Length: 10.50 InchesBlade Length: 5.20 InchesCutting Edge: 5.00 InchesThickness 0.200 thick (thickest point)Tang Holes: (6) 0.120 InchGuard Design: Slip Over Stainless SteelGuard Pin: (1) 1.5 x 0.065 InchHandle Pinstock Included = YesHandle Pins: (6) 1.5 x 1.20 Inch (Stainless Steel)Weight: 7.2oz / 205 gm.Handle Material Included = NoGift Boxed = Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Midwest Hunter – DIY Knife Making Kit – USA Design The Midwest Hunter knife kit is purpose built for use in the field. The drop point knife blank design allows for a larger cutting edge which makes the Midwest Hunter knife kit great for cutting, carving, and skinning. This design features (5) 0.156 inch through-holes for handle construction (stainless steel pinstock included) and (1) 0.250 thong hole for optional treatment. The tang holes on this model can be modified to work with larger pinstock, or with threaded fasteners. To finish, add the handle scales of your choice, together with a touch of proper finishing, and you can create a fabulous knife that you’ll be proud to own and carry for years.General Kit SpecificationsBlade Steel: 440C stainless steel | (Heat Treated/Cryo-Treated)Blade Finish: SatinBlade Length: 3.75 InchesOverall Length: 7.62 InchesBlade Width: 0.875 InchesTang Holes Diameter: (5) 0.125 InchesHandle Pinstock Included: YesThong Hole Diameter: (1) 0.250 InchesThickness: 0.125 InchesHandle Material Included: Yes, if selected aboveGift Boxed: Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Drop Point Cub – DIY Knife Making Kit – USA Design The Drop Point Cub knife kit is a great hunter/skinner design. It was purpose-created to fit well in the hand, where the butt can be held freely in the palm to improve precision cutting work control. The drop point blade is made from 440A stainless steel, and the pre-attached guard is made from high quality brass. The blade length on the Drop Point Cub is 2.75 inches, and the blade thickness is 0.130 inches. It comes hollow-ground, satin-finished, and has a pre-pinned brass finger guard attached. It features (8) 0.078 inch perimeter tang holes for handle fastening (stainless steel pinstock included), and has a single 0.187 inch thong hole for optional use (thong hole tubing not included). This is a great drop point knife kit design and is a fun, affordable, and simple project to complete.General Kit SpecificationsDrop Point CubSkill Rating: Level IIBlade Steel: 440A stainless steel (RC = 54-56)(Heat Treated)Blade Finish: SatinBlade Length: 2.75 inchesBlade Width: 0.95 inchesOverall Length: 6.625 inchesThickness: 0.130 inchesGuard: Stainless Steel (pre-pinned)Tang Holes: (8) 0.078 inches (stainless steel pinstock included)Thong Hole: (1) 0.187 inches (stainless thong-hole tubing included)Handle Material: Yes, if selected aboveGift Boxed: Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

HT Saddle Bowie – DIY Knife Making Kit – USA Design The HT Saddle Bowie knife kit is a great project for someone who wants a larger camp sized bowie with a dress 416SS (engravable) or brass guard. It is designed to fit a slip-over handle and can be finished with 3 pin placement options. This is a great hidden tang bowie blade blank design project for that favorite large stag antler you’ve been saving. With the Bowie inspired design, you get a great cutting grind with a highly tested survival tip. The blade is made from 440C stainless and the pre-pinned guard is made from 416SS (engravable) or brass. The blade length on the HT Saddle Bowie is 7.875 inches and the thickness is 0.160 inches. It comes hollow-ground, satin-finished, and has the brass finger guard attached. This hidden tang bowie knife design is a fun, affordable, and simple project to complete. The hidden tang has (3) pre-drilled 0.1875 inch through-holes in it for handle attachment (brass or stainless steel pinstock included).General Kit SpecificationsHT Saddle BowieSkill Rating: Level IIBlade Steel: 440C stainless steelRC = 54-56(Heat Treated)Blade Finish: SatinBlade Length: 7.875 InchesBlade Width: 1.57 InchesGuard: Brass or 416 Stainless SteelTang Length: 4.50 InchesTang Holes: (3) 0.187 InchesHandle Pinstock Included = Yes (brass or stainless steel)Thickness: 0.160 InchesHandle Material Included = Yes, if selected aboveDesigned in USA For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”