Item Tag: DIY Knife Making Kit

Ranger Lockback – DIY Folding Knife Making Kit – USA Design The Ranger Lockback folding knife kit is a full-sized folder and has a 2 7/8 inch satin finished flat ground blade made from 440C stainless steel. It has been cryogenically treated for additional toughness and edge holding performance. The bolsters, handle pins and liners are made of stainless steel. This lockback folding knife kit design is 4 1/4 inches closed and is 7 inches overall when open. This is a sharp looking knife design when properly finished. It is loads of fun to build and embellish. Properly finished, this knife kit will compete with knives many times its price. General Kit SpecificationsSkill Rating: Level IIIBased on modification desire.Blade Steel: 440C SS (heat-treated to RC 56-58)Overall Length: 7.0 InchesHandle Length: 4.25 InchesBlade Length: 2.875 InchesHandle Material Included: Yes, if selected abovePivot: Stainless SteelLock bar/Backspine: Stainless SteelComes with Shim StockGift Boxed = Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Persian Skinner – DIY Knife Making Kit – USA Design The Persian Skinner hidden tang knife kit is a great upswept skinner blade blank design. It is designed to fit a slip-over handle and can be finished with a single pin if desired. This is a great design project for that favorite stag antler you’ve been saving. With the Persian inspired design, you get a great cutting grind with a highly workable tip. The blade blank is made from 440A and the pre-attached guard is made from 420ss.The blade length on the Persian Skinner is 3.75 inches and the thickness is .130 inches. It comes hollow ground, satin finished and has a pre-pinned 416ss finger guard attached. This is a great Persian-styled knife making kit blank, and will make a fun, affordable and simple project to complete. The handle tang on this knife blade blank has (2) pre-drilled .156 (5/32) inch through-holes for handle construction. Stainless steel handle pinstock is incuded with this kit.General Kit SpecificationsPersian SkinnerSkill Rating: Level IIBlade Steel: 440A stainless steelRC = 54-56(Heat Treated)Blade Finish: SatinBlade Length: 3.75 InchesBlade Width: 1.0 InchesThickness: .130 InchesTang Length: 2.5 InchesTang Holes: (2) .156 (5/32) InchesHandle Pinstock Included: YesGuard: 420 stainless steel (pre-attached)Handle Material Included: Yes, if selected aboveDesigned in USA For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Pony Mid-Lock – DIY Folding Knife Making Kit – USA Design The Pony Mid-lock damascus folding knife kit is designed to be as easy as it gets for building a truly high-line pocket knife. This damascus pocket knife kit model is a Mid-lock design and already has the handle scales pre-attached to their stainless liners by 2-part, 2-ton adhesive. The scales are already expertly finished to the outer edges of the stainless steel liners and little more than light sanding is needed to finish the handle work to a completed state. This helps the beginner to achieve a pro-level finish with little or no experience, tools or shop space. This damascus folding knife kit is a magnificent beginner’s model, especially for those who want more than a screw-together challenge.The damascus blade on this model is 2 inches long and is pre-ground, etched and sharpened. The overall length of the Pony Mid-lock is 5 inches and the length when closed is 3 inches. This folder knife kit comes with full pin hardware, including nickel-silver liner pins for easy of assembly. The position of the lock on this model is excellent for a working pocket knife, even though it has a very dressy finish. General Kit SpecificationsPony Mid-lock (damascus)Skill Rating: Level II-IIIBased on modification desire.Blade Steel: 71 Layer Stainless Damascus – (8cr13 core)(heat-treated/cryo-treated)Blade Edge Hardness: RC 56-58Closed Length: 3 in. (76mm)Blade Length: 2 in. (50mm)Overall Length: 5 in. (127mm)Handle Material: Pre-attached/Included (Carbon Fiber w/20mil g10 adhesion layer)*Lock bar/Backspine: Stainless SteelComes with Shim Stock For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Utility Hunter – DIY Knife Making Kit – USA Design The Utility Hunter knife making kit is a great working fixed blade knife kit. It is designed to fit well in the hand, where the butt can be held freely in the palm to do precision cutting work by applying the forefinger to the serrated top spine edge. The blade blank is made from 440A and the pre-attached guard on this version is made from brass.The blade length on the Utility Hunter is 3.00 inches and the thickness is .130 inches. It comes hollow ground, satin finished and has a pre-pinned stainless steel finger guard attached.This is a wonderful hunting blade blank design and is a fun, affordable and simple project to complete. The tang has (2) pre-drilled .187 (3/16″) holes in it. We recommend the 3/16 inch pinstock for this knife.General Kit SpecificationsUtility HunterSkill Rating: Level IIBlade Steel: 440A stainless steel | RC = 54-56 (Heat Treated)Blade Finish: SatinBlade Length: 3 inchesBlade Width: .875″Overall Length: 6-7/8″Thickness: .130”Guard: Brass For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Oregon Skinner – DIY Knife Making Kit – USA Design The Oregon Skinner is a high quality bolstered skinning design which is 6.50 inches overall in length. It has a 2.75 inches long blade that is 0.90 inches wide and 0.125 inches thick. This AUS8 high carbon stainless steel blade comes with three 0.190 inch diameter through-holes for 0.187 inch handle pins (stainless steel pinstock included), handle bolts, and/or tubing. This pattern also has two 0.125 inch diameter holes for optional pins in the middle of the handle.The Oregon Skinner is hollow-ground and mirror-polished. It comes standard with stainless steel bolsters and bolster pins. This is a great design for a working skinner and a really fun project to build. General Kit SpecificationsOregon SkinnerSkill Rating: Level IIBlade Steel: AUS8 stainless steel | RC 56-58 (Heat Treated/Cryo-Treated for Optimum Blade Performance)Blade Finish: High PolishBlade Length: 2.75 InchesOverall Length: 6.50 InchesBlade Width: 0.90 InchesThickness: 0.125 InchesHandle Pinstock Included = YesHandle Material Included = Yes, if selected above For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

SS-3.0 Super Squirt – DIY Folding Knife Making Kit – USA Design The Super Squirt Senior (SR) button lock folding knife kit was designed to be a mid-size pocket knife design. This folding knife kit version is longer than the 2.0 series by 1.20 inches overall and has a classic 2.75 inch modified blade designed with a modern clip point.This button lock folding knife kit is stainless steel and very precise. Designed to be the finest quality knife kit available to builders. With the added functionality of the button lock system, you’ll have to look hard to find a better folding knife kit for the money, and none more fun to build, modify, or operate.This folding knife kit can be finished with simple assembly or modified with additional sanding. You can also add effects with file work and as many handle treatment interpretations as you can think of. The sky is the limit with the versatility of this design.All parts with this model come gift boxed with a natural satin finished blade, bolsters, liners, and assembly parts. General Kit SpecificationsSkill Rating: Level II-IVMechanism Type : Button LockKit Finish: Stainless Steel or BlackoutBlade Steel: AUS8 (Heat/Cryo-Treated)Blade Finish: Stainless Steel or BlackoutBlade Styles: Tactical Grind w/Thumb RestBlade Length: 2.75 InchesClosed Length: 3.375 InchesOverall Length: 6.00 InchesLiners: Stainless Steel (Heat treated. Black Finish or Stainless Steel)Handles Included: Yes, if selected above For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

CS-475 – DIY Knife Making Kit – USA Design The CS-475 is a military-styled survival knife kit with a multi-purpose design. This is an excellent mid-sized fixed blade knife kit with an overall length at 10.25 inches, and a nicely balanced 4.75 inch blade length. This fixed blade knife blank features a deep false edge and has a serrated gripper surface on the top spine of the blade. It is hollow-ground, has a beautiful satin finish, and comes pre-drilled with (3) .250 inch holes for handle pins (included – stainless steel). This fixed blade knife kit design also has a .250 inch thong hole pre-drilled in the rear of the handle (thong-hole tubing not included). Made from AUS8 stainless steel, this blade blank has been heat and cryo-treated for durability, and for maximum edge retention.For alternate handle construction, use any of our .250 inch handle pin stock, Corby rivets, handle bolts, or mosaic pins, etc. The CS-475 is a very popular model, and makes a great project for a weekend knife making session. Spend some quality workshop time with this kit and enjoy the fun of custom knife making and customization.SpecificationsSkill Rating: Level IIBlade Steel: AUS8 (Heat/Cryo-Treated)Overall Length: 10.25 inchesBlade Length: 4.75 inchesBlade Width: 1.625 inchesBlade Thickness: .178 inchTang Holes: (3) .250 inchesHandle Pinstock Included: Yes (Stainless Steel)Handle Material Included: Yes, if selected aboveThong Hole: (1) .250 inches (Tubing not included)Finish: Satin For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Persian Fighter – DIY Knife Making Kit – USA Design The Persian Fighter knife kit with stainless steel guard is an excellent full-tang upswept blade blank design. This knife kit is made from 440C stainless steel, and has a pre-pinned guard that is made from 420 stainless steel (engravable) or brass. The blade length on the Persian Fighter is 5.00 inches, and the thickness is 0.17 inches. It is hollow-ground, satin-finished, and has a pre-pinned finger guard attached.This is an excellent beginner to moderate knife kit design. It is a fun, affordable, and a simple knife kit project to complete. The Persian Fighter offers plenty of canvas for creative interpretation. From tactical handle treatments to classic fine woods, this knife can do it all. The tang has (3) pre-drilled 0.187 inch pre-drilled pin holes for handle attachment (stainless steel pinstock included).General Kit SpecificationsPersian FighterSkill Rating: Level IIBlade Steel: 440C stainless steel | RC = 54-56 (Heat Treated)Blade Finish: SatinBlade Length: 5.0 InchesBlade Width: 1.36 InchesOverall Length: 10.00 InchesThickness: 0.170 InchesTang Holes: (3) 0.187 InchesHandle Pinstock Included = Yes (stainless steel)Handle Material Included = Yes, if selected aboveGift Boxed: Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Modern Tactical – DIY Knife Making Kit – USA Design The Modern Tactical complete knife kit is 11-5/8 inches of overall muscle in an ultra-modern recurve fighter design. This tactical knife blank represents the latest in precision knife kit development. Complete with 3D milled black G10 handles, fitted handle fasteners and a .200″ thick full-tang satin finished clip point recurve fighter design, you’ll build no better, and certainly no easier high-quality knife kit that you can construct and use in minutes.This tactical knife making kit features an awesome pre-milled G10 standard handle and fastener treatment. It has an exposed tang with lanyard hole access on the standard build, but you can easily add a full handle treatment with fixed thong and little effort. The standard handles make great handle templates for customizers.This complete knife kit model is very well designed and is expertly constructed. It can be built as-is, with supplied handles, or can be customized with custom handles, grind modifications, etc. The sky is the limit with this design and imagination.This Modern Tactical kit includes(1) Padded Gift Box(1) Satin Finished 440 Blade(2) Pre-Milled Handles(3) Handle FastenersSpecificationsSkill Rating = I-IVBlade Length = 6-1/4″Overall Length = 11-5/8″Thickness = .200″Blade Steel = 440C Stainless | RC = 56-58 (Heat Treated for Optimum Blade Performance)Tang Holes = .196Thong Hole = .278Handle Material = Black G10Handle Fastener Driver = T8 TorxWeight = 14.8 oz For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”