Item Tag: DIY Knife Making Kit

Stinger – DIY Folding Knife Making Kit – USA Design The Stinger is a high-quality framelock folding knife kit model that offers excellent performance and style. This pocket knife kit design features a beautifully satin finished hollow ground blade profile with polished liners and premium assembly parts.Properly built, you can easily meet or exceed the quality and performance found on many production knives in the $200+ dollar range. The modification options on this model are virtually limitless, as you can add filework, engraving, different handle treatments and much more. The base folding knife making kit is designed to be easily assembled and does not require any additional parts for standard completion (see finished standard model below).This pocket kit knife is a modern, high-quality framelock design and offers a great value in builder enjoyment and user performance. General Kit SpecificationsSkill Rating: Level I-III (Based on modification desire)Blade Steel: 440C SS (heat-treated to RC 54-56)Frame Steel: 410 SSScrew Parts: SS Torx (High-Quality)Handle Length: 3.75 InchesBlade Length: 3.00 InchesOverall Length: 6.50 InchesHandle Material Included: YesPivot: Stainless SteelTools required: 5/64 Allen drive, 1.5 Allen drive and T6 Torx For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

GPC-1000 – DIY Folding Knife Parts Kit – USA Design The GPC-1000 (Gent’s Pocket Carry) is a locking liner folding knife kit designed for the hobbyist that likes a sleek, more stylized design. This new pocket knife kit is made of the same high quality components as our other knifekits.com designer series exclusives, but offers the maker the widest choice of modification. It is designed to look good as a “high-tech” piece, with standard micarta, G-10, or carbon fiber scales. Or as a “high-finish” model with materials such as pearl, exotic woods, and with embellishments on the liners and bolsters. This folding knife kit is a premium kit product. All parts and fittings are precision machined. The liners on this pocket knife kit are stainless steel and heat treated. The ball detent is in place, the lock is pre-bent, and the entire assembly has been personally inspected before shipping. The blade steel on the GPC-1000 is AUS-8 and has been cryogenically treated to 56-58 rc. The blade come in standard satin finsh.The GPC-1000 does not come pre-drilled on the bolster or liners for a pocket clip. This was done because of the pocket carry size of the folder, and to address our kit builder community’s desire to embellish the look of the knife, such as adding engraving to the bolsters. However, we offer the largest selection of pocket clips on the market, and have many models that work very well on this knife.Note: Completed kits with handle scales and backspines (shown above) are for completion demonstration only. Handle scales and backspine parts are not part of the basic parts kit.General Kit SpecificationsGPC-1000 “Gentleman’s Pocket Carry”Skill Rating: Level II-IV Mechanism Type : Locking LinerBlade Steel: AUS-8 (Cryo-Treated)Blade Finish: Satin Bead BlastedBlade Length: 2.75 InchesHandle Length: 3.75 InchesOverall Length: 6.50 InchesLiners: Stainless Steel (Heat treated)Pocket Clip: Not Included (see knife parts sections for options)*Note: Photos with finished handles are for demonstration purposes only. This model is sold without handle scales and/or backspine. For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Fisk/Black Vintage Bowie – DIY Knife Making Kit – USA Design The Vintage Bowie is part of our Master Series knife kit line. It is a historic reproduction of a final James Black design for Jim Bowie. This commemoration piece has been painstakingly recreated by National Living Treasure and Master Bladesmith, Jerry Fisk. With the Vintage Bowie knife kit, Jerry has reproduced a highly accurate tribute to the historic James Black final design for knife enthusiasts to build, study, and enjoy. This is an excellent kit for both knife-making hobbyists, as well as for students of knife history. Hunting, kitchen, survival or utility, this is a fantastic daily user knife, as well!The size of the Vintage Bowie is 10.25 inches overall with a 6.0 inch blade length. The blade is made from 9Cr13CoMoV (Equivalent SUS440C) stainless steel and features a 5.65 inch cutting edge. The blade width is 1.12 inches at the widest point and is 0.125 inches thick. The design features stainless steel bolsters and comes with (6) tang holes for handle fastening. All bolster and handle pins are included with this Master Series design.Find out what all the hype was about. Learn the secrets of this historic knife design as you build and construct it. Discover why so many people have exhaulted this knife for so many years. Build your very own, true-to-form reproduction of one of the most significant knives ever created. SpecificationsModel: Vintage BowieDesigner(s): Jerry Fisk/James BlackBade Steel: 9Cr13CoMoV (Equivalent SUS440C) | (HRC 58-60) (Heat Treated/Cryo-Treated for Optimum Blade Performance)Blade Finish: SatinOverall Length: 10.25 InchesBlade Length: 6.0 InchesCutting Edge: 5.65 InchesThickness 0.125 thick (thickest point)Tang Holes: (6) 0.063 InchHandle Pinstock Included = YesWeight: 4.3 oz / 122 gmBolsters/Pins Included = YesHandle Material Included = Yes, if selected aboveGift Boxed = Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

SG4 Standard – DIY Knife Making Kit – USA Design The Standard SG4 model is an excellent skinning knife blank right out of the box. However, we’ve designed this model’s blade grind to be used as-is, or for the kit builder to modify the final grind and/or tip to their own specification. The variability of this customizable blade blank, and the number of grind configurations (see below) that you can achieve make it perfect for the advanced builder.The grind lines on this fixed blade knife blank are very sharp and extremely crisp. With a 600 grit satin finish on the blade, the SG4 makes a great starting point for a superior quality finished piece. The SG4 knife kit comes with stainless bolsters and precision stainless pins. The blade blank is made from high-grade 440C stainless steel. The hardness is 56-58 rc. This is a fantastic design and is one of our most popular fixed blade knife kit models.General Kit SpecificationsSG4 “Standard Grind”Skill Rating: Level IIIBlade Steel: 440C stainless steel | (Heat Treated to 56-58 rc.)Blade Finish: 600 Grit Satin FinishBlade Length: 4.40 InchesHandle Length: 4.49 InchesOverall Length: 8.86 InchesPins: StainlessBolster Pin Holes: .187 inchesHandle Holes: .250 inchesThong Hole: .250 inchesGift Box = Yes For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”

Ranger Classic – DIY Knife Making Kit – USA Design This is a classic take on the 11 inch hidden tang blade blank design. Complete with stainless steel front guard, rear butt cap and tang nut, this hidden tang knife making kit model features a trailing-point false-edge over a hollow-grind. This trailing point blade blank design has a high satin finish on a .177 thick, 5-1/2″ inch blade. You can finish this kit in the traditional solid handle fashion, or scallop the handle and add palm swell, use stacked washers, etc. The sky is the limit with this type of handle design!This kit design is 11 inches overall with a 5-1/2″ inch blade. It is .177 thick and 1-3/4″ wide.Comes with:Blade, Guard, Butt Cap, Tang Nut, Gift BoxGeneral Kit SpecificationsRanger ClassicSkill Rating: Level IIBlade Steel: 440C stainless steel | RC = 56-58 (Heat Treated/Cryo-Treated for Optimum Blade Performance)Blade Finish: SatinBlade Length: 5-1/2″Overall Length: 11″Blade Width: 1-3/4”Thickness: .177”Tang Diameter: .228″ For more knife making kits, knife making supplies, and sheath making supplies, see “https://www.ebay.com/usr/ckkindustries”