Item Tag: Craftsman

SEXY LEVER. Used and functioning parts. These will fit the 44975 and 44985 ratchets. THIS SPECIFIC parts kit came from a gently used 44975 without OIL PORT so the short spring is present. If you have an oil port ratchet you will need to reuse your old spring. If you do not have an oil port, Ratchet , you can use all of these parts. This KIT comes with all the parts seen in the photos. Pawl. Lever. Anvil. Spring clips. Long spring. Ball bearing. Anvil ring. C47111

Used and functioning parts. These will fit the 44975 and 44985 ratchets. THIS SPECIFIC parts kit came from a gently used 44975 without oil port, so the short spring is present. If you have a long spring, you will need to reuse it. All of the parts between the 32 tooth ratchets are interchangeable except the spring. This kit will also fit a number of additional torque wrenches and happens to drive Ratchet that were unnumbered. Basically anything previous generation teardrop quickly release in half inch drive. This KIT comes with all the parts seen in the photos. Pawl. Lever. Anvil. Spring clips. Long spring. Ball bearing. Anvil ring.

Brand new parts. You get exactly what is shown. The outer ring, the outer ring clip, the ball bearing, the lever, lever clip, spring and the PAWL. That’s it. You do not get an anvil with this kit. Please make sure you understand that so I do not have to ridicule you. The lever is the black lever and it could probably use some oil. It is new, but the pink is not shiny fresh. These parts will also fit several other unnumbered ratchets. If you look at your kit and count the teeth, you may be able to determine that this kit also fits yours. The previous generation quick release Ratchet generally all have the same gear. However, many of those were not numbered.Many of the previous generation torque wrenches also take the same kit.

Brand new. This clip goes around the outer hollow ring that snapped the anvil into the Ratchet. This is the large ring. These parts will also fit several other unnumbered ratchets. If you look at your kit and count the teeth, you may be able to determine that this kit also fits yours. The previous generation quick release Ratchet generally all have the same gear. However, many of those were not numbered.Many of the previous generation torque wrenches also take the same parts. These are all new, but you will receive one of the rings shown in the last photo. They are all the same.

These will fit the 44975 and 44985 ratchets. If you have a non oil port Ratchet, you will need to reuse your old spring. If you have a-oil port Ratchet, you can use everything in this kit. Long spring.

Short spring. Ball bearing. Anvil ring. Ball bearing depressor tool. New parts from New ratchet. These parts will also fit several other unnumbered ratchets.

Short spring. Ball bearing. Anvil ring. Ball bearing depressor tool. You get the short spring so if you have a long spring, you will need to reuse your old spring. The long spring usually fit the oil port ratchets.

Used and functioning parts. This fits the 44975 and 44985 ratchets. This specific set has the short spring present so if you have an oil port, Ratchet, you will need to reuse your long spring. You get everything except the gear/anvil. The anvil had broken teeth and cannot be saved. You only get the parts shown in the photo. The description clearly says partial and you need to understand that. You will get everything additional to repair your Ratchet except the anvil. The ugliest part of this partial kit is the lever. It is not sexy, but it is totally usable and it is not broken. If you have a lever, you can reuse that would be good. If not, no big deal.

The Craftsman 1/2″ 43447 Ratchet Kit is a (rare) find for collectors and mechanics alike. Designed to fit the 44895 and 44975 ratchets, this high-quality kit from Craftsman is a valuable addition to any tool collection.